The secret to post-construction cleanup is using the right method, not the most pressure. In Union Gap, WA, we match the cleaner and pressure to the surface so it comes out clean without damage.
The right method for the job
Signs you need post-construction cleanup
- Mud and tire tracks on new concrete
- Mortar, stucco or paint splatter
- Dust on windows and siding
- Haze left on new masonry
Why it gets dirty
- Construction traffic
- Masonry and stucco work
- Painting and cutting dust
Safe steps for homeowners
- Ask your builder what's included in their final clean
- Let new concrete cure before heavy washing
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Common mistakes to avoid
- Washing new concrete too early
- Acid on new masonry without testing
- Scratching new glass when removing debris
How we handle post-construction cleanup
- Walk the site with you or your builder
- Remove splatter and debris
- Pressure wash flatwork
- Soft wash walls
- Final rinse and walkthrough
How much does post-construction cleanup cost?
What moves the price:
- Area and number of buildings
- Scheduling: early-morning, overnight or weekend work
- Whether wash water has to be recovered under local stormwater rules
- Frequency: recurring service is usually priced lower per visit
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Local post-construction cleanup for Union Gap, WA
In Washington, commercial properties mostly need moss and algae removed from walkways and entrances to reduce slip hazards, plus regular building washing.
Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.
Besides Union Gap (ZIP codes 98901, 98902 and 98909), we handle post-construction cleanup in Yakima (3.4 mi), Terrace Heights (3.8 mi), West Valley (6.6 mi) and Ahtanum (7 mi). Call (555) 010-0000 for a free quote in Union Gap.
Post-Construction Cleanup: frequently asked questions
How much does post-construction cleanup cost in Union Gap, WA?
Post-Construction Cleanup typically costs $300-$1,200 for a typical new home exterior, and usually takes 2-6 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for post-construction cleanup?
Post-Construction Cleanup is usually done with pressure wash and detail cleaning, with the pressure adjusted for each surface. Delicate surfaces nearby, such as siding, windows and plants, are protected or cleaned with lower pressure.
Is post-construction cleanup safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule post-construction cleanup?
Once, at the end of the project. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.